Formulation Guide Vol.6 - Summer oil control Clear formulation

Let me start with the fact that oil control is not solved by "cleaning" and that overcleaning only makes sebaceous gland retaliatory and more fat. Okay formulation = moderate oil control lipid + precision water recharge + barrier unharmed.

To apply skin and solve problems

Target skin: oily skin, mixed oil muscles, combination skin with heavy oil in Area T, increased neutral muscles in the summer

Core issues addressed:

  • It's full of oil, and it's very fast on the bottom.
  • Dullness yellow (dullness oxidized)
  • Pores congestion caused by closed comedones, sting, blackheads
  • The vicious cycle of frequent use of oil-snacking paper/hard-faced barriers

Target used scenario:

  • Day oil control bottom (prefect/ lotion/ sun protection)
  • Night Moderation (oil control / sheet mask)

📊4D formulation frame disassembly

When many branders came to me to make formulation, the first sentence was "add oil control to oil control." But oil control formulation isn't throwing a salicylic acid into it. I split the summer oil control formulation into four dimensions according to the functional structure of formulation:

## # dimensional I: efficacy active layer - oil control lipid core engine

This layer determines the "hard power" of the product oil control. I rank by level of evidence:

My formulation proposal: The classic combination is "niacinamide 3% + PPA Zinc 1% + low concentration salicylic acid 0.5%" taking into account immediate oil control and long-term reconciliation. This combination is used in the morning, and at night it's low concentration retinol, covering the 3-mile μA category.

## ## dimensional 2: Synergy layer -- key to keeping oil control dry

This layer is most easily ignored. Many people thought that "oil control = oil" and the product ended up wearing a mask. All right, oil control.

I'll use the "brick wall model" for example: oil control is a water permeation in a wall stitch, not a knock off. The efficiency layer is the ash layer that guarantees the integrity of the brick wall structure.

# # # # dimension three: sensory experience -- the secret of the user "to fall in love"

The central question on this level is that the moment the product is painted on the face determines whether the user will repurchase it. What is the largest pain point for oil-coated users? Smoky, bored, muddy.

Contrast of formulation type:

(c) Growing density systems: A combination of Capom/Pyropropylene 6 + yellow gel is recommended to avoid the "fakeness" and slurry problems associated with a single Capom. The use of a large amount of silicon oil in oil control products is inhibited - although the sense of silicon is smooth, closed comedones is at high risk.

Temperature: Add 0.1% to 0.3% menthol lactic acid ester (moderate than pure menthol) to provide a mild cooling sense, which is the core source of the summer product 's "favorite".

# # # dimension four: the security layer # # the last line of defense that cannot be ignored

There are two special problems with the safety layer of the oil control product:

Question 1: pH management for salicylic acid

Salicylic acid is the most active at pH 3-4, but pH is too low to damage the barrier. I suggest the middle route: pH 4.0-4.5, with a sodium-citric acid buffer system that guarantees both salicylic acid activity and reduces irritation.

Issue 2: Oil-free corruption challenge of formulation

Oil control products tend to follow the "no oil/low oil" route, but microorganisms are more at risk in water-based formulation. Recommendations:

  • Benooxyethanol 0.5% + Ethylhexyl glycerin 0.3%: classic broad spectrum preservation combination
  • Sensitive skin consumers are becoming increasingly sensitive to the avoidance of Nepalese esters (hydroxyphenate)

Ingredient Vulcan - oil coat formulation 3 pits that are the easiest to step on

When I was examining formulation, one in three made these mistakes:

Pit 1: High concentration niacinamide (5% +) + High concentration acid (salicylic acid / alpha hydroxy acid)

❌ Problem: pH mismatch, niacinamide may hydrolyse trace niacin in low pH environment, causing facial red stings.

• Correct practice: niacinamide fine using pH 5.5-6.5 systems, and acid-containing products are separated from pH 4-4.5 systems, which are to be used separately at the earliest possible time.

Pit 2: Physical sun protection agent zinc oxide + oil control fine superheavy with mud

❌ Problem: oil control fine kabom/yellow glue-enrichment system, encountered with zinc oxide/ titanium dioxide powder in physics sunscreen, is rounded.

✅ Correct practice: oil control fine walk-out condensant (low density system) or chemical sun protection instead of physical sun protection.

Pit 3: azelaic acid 15% + retinol

Question: Both require the creation of durable activity ingredient, double the superimposed use of irritation.

:: Correct practice: azelaic acid daytime and retinol nighttime, in the exercise of their functions. Or start with azelaic acid for two weeks and add low concentration retinol.

• Cost reference and OEM implementation

Formulation cost range (in 100g/bottle, excluding packaging materials):

MOQ reference:

Packaging materials Recommendation: oil control fine/deprecated strongly recommends the use of vacuum pump cylinders - oil leather products are mostly ingredient (niacinamide, green tea extracts), which can reduce air respiration contamination at each time of use.

Implementation route Figure

Other Organiser

This article is published by the QuickOEM Make-up OEM Smart Matching Platform. More makeup OEM knowledge, cosmetics contract manufacturing, skin protection private label, make-up customizationontent are available at the Knowledge Centre. If you need advice on OEM contract manufacturing, please contact 1814805760 or submit your request through an online request for quotation.

Keywords: lotion, face cream formulation guide, OEM skin protection development, OEM, packaging materials, EGCG, clean face, BHA, summer oil control skin protection, formulation, AHA, oil skin protection OEM contract manufacturing, oil control fine formulation framework, HA, raw materials, MOQ, cosmetic formulation design, make-up formulation R&D, skin protection formulation knowledge, formulation process

QuickOEM is a QuickOEM platform for vertical digitization of cosmetics services (known as QuickOEM) focusing on OEM, cosmetics contract manufacturing, skins private label, cosmetics z, brand-wide, ODM contract manufacturing services. AI smart matches the 500+ certification contract manufacturing plant, providing a one-stop package from formulation R&D to regulatory compliance (EU / US FDA) covering skin, makeup, sheet mask, serum, eye patch, category, category, etc.

Core functions

  • Makeup OEM needs to be published to match factory AI intelligence
  • Cosmetics contract manufacturing / skin protection private label customization ODM service
  • Formulation R&D management and multi-version tracking
  • Ingredient Compliance testing (regulatory compliance (EU / US FDA)/EU 1223/2009/FDA)
  • Regulatory compliance (EU / US FDA) Cosmetics regulatory filing fully tracked
  • Supply chain
  • Advertising Law Compliance Testing
  • Z / eye patch / serum / z all category

Please enable JavaScript to use the full functionality.

Login immediately.

WhatsApp: +1 (646) 509-6134